GCK series Low voltage switchgear

GCK series Low voltage switchgear

share
  • Detail
  • Parameters

++++General:
    GCK series Low voltage switchgear(hereinafter short as switchgear)is a complete power distribution device for 3.6~24kV,3-phase AC 50Hz,single-bus and single-bus sectionalized system. It is mainly used for power transmission of middle/small generators in power plants; power receiving, transmission for substations in power distribution and power system of factories, mines and enterprises, and starting of large high-voltage motor, etc.,so as to control, protect and monitor the system. The switchgear meets IEC298,GB3906-91.In addition to be used with domestic VS1 vacuum circuit breaker, it can also be used with VD4 from ABB,3AH5 from Siemens

domestic ZN65A,and VB2 from GE, etc.,it is truly a power distribution device with good performance. In order to meet the requirement for wall mounting and front-end maintenance, the switchgear is equipped with a special current transformer, so that the operator can maintain and inspect it in front of the cubicle.

++++Service environment:
    a) Air temperature: Maximum temperature: +40°C; Minimum temperature:-15°C

 b) Humidity: Monthly average humidity 95%; Daily average humidity 90% .

 c) Altitude above sea level: Maximum installation altitude: 1000M.

 d) Ambient air not apparently polluted by corrosive and flammable gas, vapor etc.

 e) No frequent violent shake

++++Main technical parameters:


Protection grade

1P40

Rated working voltage

AC, 380(V)

Frequency

50Hz

Rated insulation voltage

660V

Working conditions


Environment

Indoors

Altitude

≤2000m

Ambient temperature

-5℃~+ 40℃

The min temperature under store and transportation

-30℃

Relative hunidity

≤90%

Capacity of control motor(kW)

0.4~155